Elastomeric Resin Based, UV Resistant, Super Elastic Waterproofing Material - WHITECOAT SP

Description

WHITECOAT SP is an elastomeric resin based, single component, ready to use, super elastic water insulation material.

Fields of Application

• In water gutters and wet volumes for horizontal or vertical applications.
• In water insulation in old – new, flat or inclined terrace roofs.
• In terrace, balcony, rain gutter, strainer, draining board, canals, chimney surroundings and under coating insulation of the wet areas.

Features and Benefits

• Single component.
• Ready to use, easy to apply.
• Protects elasticity under low temperatures.
• UV resistant.
• Permits water vapour to the surface.
• Can be painted with acrylic paint.
• Colourized with water based pigment paste.

Application Procedure

Preparation of Substrate

The application surface must be dry, sound, mainly smooth, clean and clear of materials which prevent bonding, such as oil, rust, paint, silicone, curing agents, detergents and paraffin wax. Surface defects and voids should be repaired with suitable REPAMERK repair mortars. Steel surfaces should be primed with suitable anti-corrosion material before application. WHITECOAT SP diluted to 25-30% or SPR 104 acrylic primer should be used as a primer on surfaces like eternit, foamed blocks, brick, tile, masonry, concrete and plaster.

Application Method

WHITECOAT SP is applied on the substrate by brush, roller or spray as two or three layers. Brush application direction in each layer must be perpendicular to each other. Minimum 4 - 5 hours should be waited between the layers. This product is not suitable on its own for waterproofing against hydrostatic pressure. It is recommended to reinforce the vertical and horizontal joints of excessively cracked surfaces by using geotextile protection layer or Fibermesh.

Consumption

0,75 kg/m² per layer for vertical; 1,0 – 1,5 kg/m² per layer for horizontal places. Recommended at least 2 layers application.

Package

20 kg plastic bucket