Bentonite Based, Swelling Waterstop - SWELLBAND

Description

SWELLBAND is an active sodium bentonite/butyl rubber based waterstop designed to stop water infiltration through cast in place concrete construction joints by expanding upon contact with water to form a positive seal against the concrete. It also fills the cracks and pores on the concrete.

Fields of Application

• SWELLBAND can be used on swimming pools, tunnels, subways, retaining walls, curtain walls,
• Water tanks, sewage systems, water purification facilities,
• Underground pipe and cable inlets,
• Concrete joints, barrage, road and intersections of old and new concretes.

Features and Benefits

• Easy to apply.
• Easy application even with huge amount of rebar.
• Connecting seams require only putting together side by side and pressing.
• The swelling occurs in a controlled.
• Does not swollen suddenly cast in concrete.
• Safely used in water tanks.

Application Procedure

Preparation of Substrate

The surface must be clean and dry. It must not be applied to wet, frozen, greasy or dusty surfaces, and under wet weather conditions. SWELLBAND should be protected from humidity and rain before the application.

Application Method

Roll out required amount of SWELLBAND. SUPERTACK 290 is placed in the middle of the joints and SWELLBAND is glued on it and fixed on the surface. Place seams side by side or end to end; do not overlap. Make sure waterstop covers all parts of the surface, especially for surfaces which are not perfect in shape. Remove silicon paper and pour concrete carefully and indirectly. It is not suitable for the joints of precast building elements.

Consumption

Depends on application areas.

Packaging

5 mm x 20 mm - 15 m/box

10 mm x 20 mm - 10 m/box

15 mm x 20 mm - 5 m/box

20 mm x 25 mm - 5 m/box