Epoxy Based, Two Component, Solvent Free Primer with Fillers - EPOX PR 200

EPOX PR 200

Description

EPOX PR 200 is an epoxy resin based, two component, solvent-free epoxy primer with fillers.

Fields of Application

To prime concrete, asphalt, metal, epoxy, polyurethane based substrate before the application,
To prime exterior asphalt and floors before polyurethane based coating,
Used as an adhesion promoter primer before cement based material application on old concrete,
Used for filling the cracks on the concrete.

Features and Benefits

Fills the cracks simply.
Helps to adhesion of topcoat on to the substrate.
Solvent free.

Application Procedure

Preparation of Substrate

The application surface must be durable, fully cured, sound, dry, clean and clean off all contaminant, rust, oil, dust etc.

Application Method

Component A and B should be mixed by low speed mixture for 3-4 minutes till homogenous mixture is obtained. Mixture should be applied on the surface by using a trowel or roller. According to application surface, one or second coats can be applied. Second coat must be applied before first coat is not fully cured. Application must be done within 45 minutes. According to weathering conditions, top coat application should be started after 2 to 24 hours. Final curing is done after 7 days. Surface must be protected from water and rain during 24 hours after application. During the application and surface temperature must be between +10°C to +30°C. In rainy and windy days, material must not be applied.